8 Ohm 50W Audio Amplifier - Plenum Rated (TAA Compliant)
#40880
C2G
8 Ohm 50W Audio Amplifier - Plenum Rated (TAA Compliant) is rated
out of
5 by
1.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$525.99 $583.99 MSRP USD
The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications
Noise Reduction
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
Standby Mode
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
Accessory Power Output
The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the
Noise Reduction
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
Standby Mode
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
Accessory Power Output
The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the
Connector 1:
(1) 3.5mm Stereo Female
Connector 2:
(1) RCA Stereo Audio Female, (1) 3.5mm Microphone Female
Quantity
886 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Reduces noise in commercial environments
- Industry standard 8 Ohm design
- Designed for installation in Plenum air spaces
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
| Product Line | C2G | ||
| Color | Black | ||
| UPC Number | 757120408802 | ||
| Country Of Origin | Taiwan, Province Of China | ||
| Application Sector | Commercial, Residential | ||
| Type | Amplifier |
Dimensions
| Product Width US | 4.54 in | ||
| Product Height US | 1.49 in | ||
| Product Length US | 4.31 in |
Listing Agencies / 3rd Party Agencies
| FCC Compliant | Yes |
Buy American Act Compliance
| TAA Compliant | Yes |
Technical Information
Resources
Cutsheet
Data Sheet
User Guides
Reviews
Rated 5 out of
5
by
Ceaaudiovideo from
Great choice for small projects
Enough power to drive 4 speakers in an indoor pool area. Flexible and convenient control options too.
Date published: 2019-10-07
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Are there manuals specific to connecting the power supply correctly?
Yes, page six states the wire with the white stripe is positive.
Date published: 2017-10-06
Is there a HDMI input so that I can hook up my smart tv?
This does not have a HDMI input. This amplifier only has a analog RCA and 3.5mm input.
Date published: 2021-06-16
is it 50 Watts each channel out or 25 watts per channel out (aka 50 Watts RMS)?
This amp is 25 watts per channel.
Date published: 2021-07-07
It has PA inputs that it says "Mute the Audio Inputs". Does the incoming PA audio get played over the sound system speakers? Or, should additional speakers be installed for the PA?
PA speakers are usually set up on its own 70v system. So all the other inputs would mute these being on different speakers.
Date published: 2017-10-06
Does this amp turn on & off with audio signal through the RCA inputs?
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode instantly when a signal is received. It will not power off but enter a sleep or Hibernate mode until it sees a signal again
Date published: 2017-10-06
What does it mean if the output LED light flashes slowly when the unit is powered?
- Green Constant: ON and operating properly
- Red Constant: Amplifier is turning off from RS-232.
- Amber Constant: Standby Mode
- Green Blinking: Page In
- Amber Blinking: Mute
Date published: 2020-03-02
On the power supply how do you tell which wire is ground and which is hot?
The Wire with the WHITE stripe is positive.
Date published: 2017-10-06
Bazaarvoice SAP Hybris Integration Version 2.8.1