![High Speed HDMI Cable with Built-In Power Inserter - 4K 60Hz](https://cdn2.webdamdb.com/1280_g4vQtAnsNJh5.jpg?1625706927)
![High Speed HDMI Cable with Built-In Power Inserter - 4K 60Hz](https://cdn2.webdamdb.com/1280_AMU3gfEfTf84.jpg?1625706908)
![High Speed HDMI Cable with Built-In Power Inserter - 4K 60Hz](https://cdn2.webdamdb.com/1280_2H4aOFebOBh7.jpg?1625706899)
![High Speed HDMI Cable with Built-In Power Inserter - 4K 60Hz](https://cdn2.webdamdb.com/1280_MSxZhQD9pYx5.jpg?1625707006)
![High Speed HDMI Cable with Built-In Power Inserter - 4K 60Hz](https://cdn2.webdamdb.com/1280_EJ3Rc2D9iq64.jpg?1625707004)
15ft (4.6m) High Speed HDMI® Cable with Built-In Power Inserter - 4K 60Hz
#56792
C2G
Bazaarvoice SAP Hybris Integration Version 2.8.1
$24.99 $26.99 MSRP $14.49 USD
The High Speed HDMI Cable with Built-In Power Inserter supports all HDMI 2.0 features and is the ideal solution for supporting HDMI bus-powered devices such as extenders, active cables, AOC cables or signal-sensing switches. This cable eliminates the need for separate voltage inserters or adapters, which increases reliability.
Power
The power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video (EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows for the necessary and proper voltages for the hardware “handshake”, HDCP key authentication and exchange, EDID information exchange and hot plug connection detect.
Performance
The attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting, and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.
Note: For proper use of this cable, the USB Micro-B female connector must be attached to a power source. The cable is directional with a Source/Transmitter (TX) side and a Display/Receiver (RX) side. The cable and HDMI connectors are marked with TX and RX for added convenience.
Power
The power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video (EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows for the necessary and proper voltages for the hardware “handshake”, HDCP key authentication and exchange, EDID information exchange and hot plug connection detect.
Performance
The attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting, and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.
Note: For proper use of this cable, the USB Micro-B female connector must be attached to a power source. The cable is directional with a Source/Transmitter (TX) side and a Display/Receiver (RX) side. The cable and HDMI connectors are marked with TX and RX for added convenience.
Connector 1:
(1) HDMI Male
Connector 2:
(1) HDMI Male
Quantity
29 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Supports all HDMI 2.0 features including resolutions up to 4K (4096 x 2160 at 60Hz)
- Low loss power insertion
- Attached Micro USB female power inserter
- Micro USB male to USB-A male cable
 
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
Product Line | C2G | ||
Color | Black | ||
UPC Number | 757120567929 | ||
Country Of Origin | China | ||
Application Sector | Commercial, Residential | ||
Warranty Type | 5-Year | ||
Type | Active Device, Cable |
Dimensions
Product Length US | 15.0 FT | ||
Cable Length | 15 ft |
Listing Agencies / 3rd Party Agencies
REACH Compliant | Yes |
Technical Information
Jacket Material | PVC (Polyvinyl Chloride) | ||
Wire Gauge | 30 AWG | ||
Video Resolution | 1080p, 4K, 4K 30Hz, 4K 60Hz | ||
Bend Radius | 120 mm | ||
Cable Type | High Speed HDMI, Video | ||
Jacket Rating | Standard / Non-Rated | ||
Cable Diameter | 6 mm |
Resources
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I bought a KVM switch with 4 foot cable with HDMI on one end and HDMI & USB on the other end. The KVM switch specs say resolution up to 3840*2160/30Hz. However, I'm looking for a 10 ft long equivalent. Would this cable be compatible?
This particular cable is not used for a KVM. This cable is used to supply HDMI BUS power. The cable you have is more than likely proprietary to that particular KVM. I would suggest talking to the manufacturer of the KVM.
Date published: 2021-10-29
Bazaarvoice SAP Hybris Integration Version 2.8.1