


Discontinued - TruLink® USB 2.0 Over Cat5 Superbooster™ Dongle Transmitter to Wall Plate Receiver Kit
#53879
C2G
Bazaarvoice SAP Hybris Integration Version 2.8.1
The Trulink USB 2.0 Superbooster was designed for systems integrators, installers and other end users seeking an innovatively simple yet powerful solution for extending USB signals beyond their native 16.4ft length limitation. Specifically for use in commercial environments, the Trulink USB 2.0 Superbooster is the only USB 2.0 solution on the market that is available in both a dongle and wall plate version. The wall plate and dongle can be interchanged to fit the needs of any installation requiring high performance and maximum flexibility.
Using true USB 2.0 speed and power, this solution provides increased bandwidth and faster data transfer speeds over standard Cat5/6 cabling at lengths up to 328ft. Integrated UTP power inserter technology provides 500 milliamps of power when the power adapter is connected through the transmitter end or receiver end, depending on the desired configuration. This provides enough power to operate most new USB devices and allows for flexibility in equipment placement.
The single gang wall plates provide the clean look of a professional installation. The small form factor of both the dongle and wall plate versions allows for easy installation in tight spaces. The dongle end is uniquely designed to allow it to be securely tethered to other equipment. Installation is quick and easy with no software or driver installation required.
This solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end.
[B]Note:[/B] The screw terminals used to power the wall plate are non-polarized. Either port may be used for the positive or negative connection to power.
[B]Note:[/B] If the USB signal is being extended to support a 300 series or 500 series Promethean interactive whiteboard, then we recommend using our product [L path="http://www.cablestogo.com/product/29338"]29338[/L]. For more information about this recommendation, read our [F path="/app-bulletins/10272_Superbooster Ext App Bulletin.pdf"]application bulletin[/F].
[*]Download the manual from the Support tab
[*]Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
Using true USB 2.0 speed and power, this solution provides increased bandwidth and faster data transfer speeds over standard Cat5/6 cabling at lengths up to 328ft. Integrated UTP power inserter technology provides 500 milliamps of power when the power adapter is connected through the transmitter end or receiver end, depending on the desired configuration. This provides enough power to operate most new USB devices and allows for flexibility in equipment placement.
The single gang wall plates provide the clean look of a professional installation. The small form factor of both the dongle and wall plate versions allows for easy installation in tight spaces. The dongle end is uniquely designed to allow it to be securely tethered to other equipment. Installation is quick and easy with no software or driver installation required.
This solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end.
[B]Note:[/B] The screw terminals used to power the wall plate are non-polarized. Either port may be used for the positive or negative connection to power.
[B]Note:[/B] If the USB signal is being extended to support a 300 series or 500 series Promethean interactive whiteboard, then we recommend using our product [L path="http://www.cablestogo.com/product/29338"]29338[/L]. For more information about this recommendation, read our [F path="/app-bulletins/10272_Superbooster Ext App Bulletin.pdf"]application bulletin[/F].
[*]Download the manual from the Support tab
[*]Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
Connector 1:
(1) USB-B Female, (1) RJ-45 Female
Connector 2:
(1) USB-A Female, (1) RJ-45 Female
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Extends USB 2.0 signals up to 328 feet
- Uses a single standard network patch cable
- Supplies 500 milliamps of power at the receiver
- Powered with a single power supply at the transmitter or receiver
- Kit includes both the transmitter and receiver units
 
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
Color | Black | ||
Type | Kit, Receiver, Transmitter, Wall Plate | ||
Application Sector | Commercial, Residential | ||
Product Line | C2G | ||
Country Of Origin | China | ||
UPC Number | 757120538790 |
Technical Information
Cable Diameter | 5.5 mm | ||
Max Distance Support | 328 ft | ||
Data Transfer Rate | 480 Mbps | ||
Jacket Rating | Standard / Non-Rated | ||
Number of Gangs | 1 | ||
Power Supply | AC Adapter | ||
Signal Transmission | Bidirectional |
Resources
Cutsheet
Data Sheet
User Guides
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
When and where do the modules need to be connected to DC power? Some of the example diagrams you have show DC power, but not all. I was not able to locate an installation manual.
You would need to connect external power to the wall plate via the Phoenix connector and DC power to the receiver. This kit would need to be powered at all times.
Date published: 2017-10-05
Will this device work with Isochronous USB video data streams?
Yes, this USB 2.0 extender supports isochronous USB data transfer.
Date published: 2017-10-05
Spec sheet states "Power injector feature allows the power adapter to be placed" at either end. Yet the Q&A states power must be supplied at both ends. Which is it?
This only requires power at one end, either the transmitter or receiver.
Date published: 2017-10-05
Can this extender be used to connect a computer to a wireless Mouse and Keyboard USB receiver, located about 85' feet from the computer?
Yes, it could be used to extend a wireless keyboard and mouse.
Date published: 2017-10-05
Does this product family support isochronous USB devices such as a digital audio interface?
This product does support isochronous USB data transfer.
Date published: 2017-10-05
Does the wall plate receiver have an integral USB hub? I see that it only has a single port for connection. My application requires a point-to-point connection without an integral hub.
Product 53879 will be recognized as a hub.
Date published: 2017-10-05
Bazaarvoice SAP Hybris Integration Version 2.8.1