12ft (3.7m) Pro-Audio XLR Male to XLR Female Cable
#40060
C2G
1.5ft (0.46m) Pro-Audio XLR Male to XLR Female Cable is rated
out of
5 by
14.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$20.99 $31.99 MSRP USD
Use this XLR to XLR cable to connect unbalanced sources to balanced XLR inputs. This pro-audio cable is made from 22 AWG twisted pair audio cable under an aluminum foil shield and 60% copper braid for maximum shielding from noise. The highly flexible 7mm PVC jacket reduces the risk of the cable kinking and damaging the conductors.
Bright nickel plating on solid brass connectors resists wear from reconfiguring and moving equipment from one venue to another. Spring strain relief on the 1/4in plug and a chuck strain relief inside the XLR reduce the effects of age on the solder joints and contacts.
Bright nickel plating on solid brass connectors resists wear from reconfiguring and moving equipment from one venue to another. Spring strain relief on the 1/4in plug and a chuck strain relief inside the XLR reduce the effects of age on the solder joints and contacts.
Connector 1:
(1) XLR 3-pin Male
Connector 2:
(1) XLR 3-pin Female
Quantity
561 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- 22 AWG conductor construction
- Foil and braided shield to protect from interference
- Highly flexible jacket
- Nickel-plated connectors
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
| Product Line | C2G | ||
| Color | Black | ||
| UPC Number | 757120400608 | ||
| Country Of Origin | Vietnam | ||
| Application Sector | Commercial, Residential | ||
| Warranty Type | Lifetime | ||
| Type | Cable |
Dimensions
| Product Length US | 12.0 FT | ||
| Cable Length | 12 ft | ||
| Outside Diameter | 6 mm |
Technical Information
| Jacket Material | PVC (Polyvinyl Chloride) | ||
| Wire Gauge | 22 AWG | ||
| Storage Humidity | 20-80% RH (Non-Condensing) | ||
| Cable Type | Adapter, Audio | ||
| Jacket Rating | Standard / Non-Rated | ||
| Cable Diameter | 6 mm | ||
| Operating Temperature | -20°-80°C | ||
| Storage Temperature | -20° - 80° C |
Resources
Cutsheet
Reviews
Rated 5 out of
5
by
Passacaglia from
Outperforms audiophle cables
My replacement preamp (Gemini PA-1000) is about 20db down from the output of my DH110 on the unbalanced RCA outputs. It produced the same slight hiss that the DH110 had always produced with my Van Alstine DH200B. I had always assumed this to be normal for the 100 watt RMS/channel amp. Even with the slight hiss, the amp/preamp combo was precise enough that other people bought Van Alstine equipment after listening to mine.
Over the years, the Hafler preamp deteriorated. Modifications I had done to the outputs (gold RCA jacks) made the boards unusable for conversion to VanAlstine circuits when the DH110 preamp finally failed. Due to monetary constraints, I replaced it with the Gemini.
I replaced the amps input jacks with XLR Female panel-Mount Connectors from Cables To Go, and used the balanced outputs from the Gemini with the 6-foot Pro-Audio XLR cables. The balanced outputs are about 14db up from the unbalanced, but that's not as important as the cables!
Clinical precision! NO hiss at any volume level. The signal to noise ratio must be nearly infinite. I've had this amp since 1985 and now it's impressing my grand children; and I'm having a blast going back through my music collection.
Date published: 2011-05-01
Rated 5 out of
5
by
Woodster from
CablesToGo made my stereo go
Used for my surround sound processor to amp.
Date published: 2010-12-29
Rated 4 out of
5
by
Cord Scratcher from
Improved Sound
I replaced cables that did not stay connected to my mixing board, producing static or loss of connection. The new cables snap securely into the socket and the sound quality is much better than before.
Date published: 2012-07-28
Rated 5 out of
5
by
Scottdren from
Clean Sound, Black background
I plugged these cables in replacing the unbalanced connections from my Music Hall DAC to my integrated amp, and immediately heard a difference. Since this is my first use of balanced cables I might be just telling everybody what they already know here. These cables do an amazing job of transferring that warm sound straight from the tube-output DAC without any harshness, and completely eliminated any background hiss I heard using the RCA cables I had before.
Date published: 2009-09-04
Rated 4 out of
5
by
Loreli from
Great buy
We've only tested them so far but from the tests we believe these will give us the quality we're looking for. A great buy for the money.
Date published: 2014-06-29
Rated 4 out of
5
by
Bartley Davis from
XLR Cables
Great quality, and fast turn around.
Date published: 2010-12-29
Rated 4 out of
5
by
gaby z from
excelent product
for professional audio system
Date published: 2010-03-08
Rated 5 out of
5
by
Raj from
"I would buy this product again and agai
Excellent response.
Date published: 2010-07-19
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What is the weight for part numbers 00706, 03132, 03147, 28102, 28103, 35677, 35669, 40060?
Here are the weights
00706 - .062 lbs
03132 - .290 lbs
03147 - .180 lbs
28102 - .190 lbs
28103 - .280 lbs
35677 - .370 lbs
35669 - .260 lbs
40060 - .540 lbs
Date published: 2024-03-28
What is the diameter of this cable? What color are the wires inside? What is the outside jacket made of?
The diameter is 6.0mm. The wires inside are red and white. The jacket is PVC.
Date published: 2017-10-05
are to cable FT6 certifed, can they go in a plenum ceiling?
The jacket on this cable is PVC and is not Plenum rated.
Date published: 2024-10-04
Country of origin?
China
Date published: 2017-10-05
What type of insulation is on the twisted pair wires in this cable? PVC? Teflon?
The insulation is foamed PE (Polyethylene).
Date published: 2017-10-05
Bazaarvoice SAP Hybris Integration Version 2.8.1