10ft (3m) 18 AWG Universal Right Angle Power Cord (NEMA 5-15P to IEC320C13R) (TAA Compliant)
#27909
C2G
14ft (4.25m) 18 AWG Universal Right Angle Power Cord (NEMA 5-15P to IEC320C13R) (TAA Compliant) is rated
out of
5 by
30.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$7.99 $10.99 MSRP USD
Replace your overused or misplaced power cable, or just get some extra cords for convenience. This universal right-angled power cord is ideal for tight areas and will plug into PCs, monitors, scanners, printers and other devices that use the 3-pin shroud power connector. Plus this heavy duty 18 AWG cord features a fully molded design for maximum durability and long life.
The female connector plugs directly into the device while the male connector plugs into a standard outlet.
The female connector plugs directly into the device while the male connector plugs into a standard outlet.
Connector 1:
(1) C13 IEC
Connector 2:
(1) NEMA 5-15 Male
Quantity
2726 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
| Product Line | C2G | ||
| Color | Black | ||
| UPC Number | 757120279099 | ||
| Country Of Origin | Taiwan, Province Of China | ||
| Application Sector | Commercial, Industrial | ||
| Warranty Type | Lifetime | ||
| Type | Power Cord |
Dimensions
| Product Length US | 10.0 FT | ||
| Cable Length | 10 ft |
Buy American Act Compliance
| TAA Compliant | Yes |
Technical Information
| Wire Gauge | 18 AWG | ||
| Jacket Rating | SVT Rated | ||
| Amperage | 10 A | ||
| Voltage | 125.0 V |
Resources
Cutsheet
Reviews
Rated 5 out of
5
by
Chris the quilter from
Fast Delivery
Using this cord for a longarm quilting machine. Runs from the UPS to the machine and allows for travel on frame. Original cord was too short.
Date published: 2013-09-10
Rated 5 out of
5
by
Mike N from
Most satisfactory power supply cord for Laser Printer.
This well made power cord with extended length works well with my HP LaserPrinter and allowed placement of the printer at the desired distance from the power recepticle.
Date published: 2016-12-02
Rated 5 out of
5
by
redecorator from
Excellant replacement cord
We were mounting our TV on the wall and realized our power cord would not be long enough. A friend had told us about C2G and we went to the website and found the right one right away!
Date published: 2012-11-13
Rated 5 out of
5
by
DJ from
I have purchased time, time again
We use these as replacements for the power cords we get from our AUS, UK, and FRANCE companies. They work great and have never had any problems with them.
Date published: 2016-02-25
Rated 4 out of
5
by
Tom from
Worked perfectly
These were used to replace straight cords that were furnished with the equipment. The straight cords were stressed from the back of the equipment being against a wall.
Date published: 2014-01-20
Rated 5 out of
5
by
carm from
it was exactly what I needed,my unit works fine
I used it for my flat screen tv
Date published: 2017-06-29
Rated 4 out of
5
by
Rob from
Fit (almost) the bill
I got this cord for a wall mounted tv, to reduce the clearance required for the tv power/cables. In this case, I went from about 1.75" clearance to the wall, to about 3/4" - perfect. The only thing to worry about here is how deep the socket in the chassis for the power is. In my case (Samsung tv), the socket is about 0.100" deeper than optimal. The cord still works, but it doesn't seat as completely as you'd like.
Date published: 2009-07-06
Rated 4 out of
5
by
flatcreek from
A Perfect Fit
Used this longer cord for a hidden cord application on a wall mounted flat screen TV. It would have worked better if the plug on the appliance end had been rotated 180 degrees, but I guess you can't have everythng Other than that this worked perfectly.
Date published: 2012-01-21
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I have an LG60pn5300 plasma 2013 model year. Will this plug work?
Based on your information it looks like that could work for you.
Date published: 2017-10-26
Bazaarvoice SAP Hybris Integration Version 2.8.1