10ft (3m) Dual Infrared (IR) Emitter Cable (TAA Compliant)
#40433
C2G
10ft (3m) Dual Infrared (IR) Emitter Cable (TAA Compliant) is rated
out of
5 by
5.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$13.99 $21.99 MSRP $11.75 USD
Ideal for use with #40430, Remote Control Repeater Kit. Plug this IR emitter into a 2-conductor 3.5mm keystone jack and stick it over the IR eye on your audio/video equipment. The emitter operates on 12 VDC and is compatible with most IR devices. Put your components where they belong, not where you see them! You can even control audio/video devices located behind doors or in other rooms.
Quantity
178 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Used with an IR Repeater kit to control two devices
- Passes IR communication
- Adhesive backing allows the emitters to be attached to the IR eye of a device
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
| Product Line | C2G | ||
| UPC Number | 757120404330 | ||
| Country Of Origin | Taiwan, Province Of China | ||
| Application Sector | Commercial, Residential | ||
| Warranty Type | Lifetime | ||
| Type | Cable |
Dimensions
| Product Length US | 10.0 FT |
Buy American Act Compliance
| TAA Compliant | Yes |
Resources
Cutsheet
Reviews
Rated 5 out of
5
by
ToddW from
Works Great with No Problems
The Dual Emitter cable works with the IR Repeater System (#40430), which I also purchased. All remote signals for various components work properly through the emitter when transmitted both directly (e.g. when pointed at the component) and when sent via the repeater unit.
No problems or concerns.
Date published: 2010-01-18
Rated 5 out of
5
by
omega from
Works perfectly!
Using this emitter with a USB-UIRT blaster to control my cable boxes from my SageTV PVR server. It was easy to stick on the boxes and it works like a champ. So far in a month of use not one single command has been missed or misinterpreted.
Date published: 2011-03-16
Rated 5 out of
5
by
TO from
Just what I needed
Just what I needed to extend the IR signal to other devices in a closet behind my TV. Now I know where to go if I need more.
Date published: 2010-10-06
Rated 5 out of
5
by
tootall from
Excellent service and product
Replaced old emitters in my motorhome. These were a direct replacement and are working flawlessly.
Date published: 2019-01-24
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Will this dual emitter work when plugged directly in the back of a samsung 7100 series TV to control a cable box and Sonos sound bar with the remote that comes with the TV?
Unfortunately this is a emitter cable it will not work when connected directly to a device. It will not be able to receive IR information. This is meant to be connected to our 40430 IR Repeater Kit.
Date published: 2017-10-05
How far can red emitter heads be seperated? Two components are seperated from hub by about 6 feet Thank's
The emitter cables that come with the 40430 are 10ft and they are dual cords on a zip cord. These can be split all the way to the end of the cable.
Date published: 2017-10-05
What frequency range do these emitters work over? 30-60kHz?
The IR repeater receives signal frequencies from 34kHz to 40 kHz. and transmits at 38Khz.
Date published: 2017-10-05
Will this work with the Denon AVR-2313ci?
This will not work by itself on the Denon receiver. You would need something like our IR repeater kit 40430 in order to extend the IR range.
Date published: 2017-10-06
Bazaarvoice SAP Hybris Integration Version 2.8.1