2-Port USB 1.1 Over Cat5 Superbooster™ Extender Wall Plate Receiver
#29345
C2G
2-Port USB 1.1 Over Cat5 Superbooster™ Extender Wall Plate Receiver is rated
out of
5 by
2.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$103.99 $114.99 MSRP $63.43 USD
One component of a complete solution that, when paired with a transmitter (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, camera, printer, web cam, hub or other USB device exactly where you want it! Our USB superbooster wall plate is powerful yet simple, with no drivers to install or special software required. It's also compatible with any computer that supports USB.
The overall plug-and-play solution consists of this wall plate receiver, and your choice of a compatible transmitter that is sold separately: the wall plate (#29344), the dongle (#29348) or the keystone insert (#29349). Customize the configuration to your specific needs! This versatility is ideal for applications where you need flexibility at your computer/source side.
The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy in-wall installation. This delivers a clean, finished look important for homes, classrooms, offices and anywhere you don't want visible cables lying around. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster wall plate is bus-powered, no external power source is required. Compliant with USB specification 1.1.
Input: Two USB Type A Female
Output: One RJ45 Female
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
The overall plug-and-play solution consists of this wall plate receiver, and your choice of a compatible transmitter that is sold separately: the wall plate (#29344), the dongle (#29348) or the keystone insert (#29349). Customize the configuration to your specific needs! This versatility is ideal for applications where you need flexibility at your computer/source side.
The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy in-wall installation. This delivers a clean, finished look important for homes, classrooms, offices and anywhere you don't want visible cables lying around. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster wall plate is bus-powered, no external power source is required. Compliant with USB specification 1.1.
Input: Two USB Type A Female
Output: One RJ45 Female
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
Connector 1:
(2) USB-A Female
Connector 2:
(1) RJ-45 Female
Quantity
267 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Extends two USB 1.1 signal up to 150ft over category cables
- Allows for flexible positioning of USB peripherals
- Receiver is built into wall plates
- Pair with a wall plate or dongle transmitter for complete solution
- Patented, Patent No. US 7,741,562
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
| Product Line | C2G | ||
| Color | White | ||
| UPC Number | 757120293453 | ||
| Country Of Origin | China | ||
| Features | Plug and Play | ||
| Application Sector | Commercial, Residential | ||
| Type | Active Device, Extender, Receiver, Wall Plate |
Dimensions
| Product Width US | 1.31 in | ||
| Product Depth US | 1.34 in | ||
| Product Height US | 4.13 in |
Technical Information
| Number of Gangs | 1 | ||
| Data Transfer Rate | 12 Mbps |
Resources
Cutsheet
Data Sheet
White Papers & Tech Bulletins
Reviews
Rated 4 out of
5
by
Average Joe from
Using for a USB wall-mounted camera
We are building a webex/skype/video conference room and I wanted a wall mounted camera between dual wall mounted displays. To facilitate easy switching between laptops I chose a generic USB camera (also cheap!) and use these components to extend the USB distance. We have a transmitter mounted under the table feeding a port on top of the table then the CAT5 runs thru the floor and up the wall to a wall mounted receiver to connect the camera. Works slick!
Date published: 2010-04-27
Rated 5 out of
5
by
Johnny G from
Simplicity
This is the 2nd time I've bought these wonderful UBS extenders. The first time was a single receiver, now I changed up to the double, as my office needs have grown. They are fantastic because they really work, no issues whatsoever.
Date published: 2019-02-13
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
When paired with the transmitter 29344 how much power would be available from each USB port for charging portable devices?
The charging power will be cut to less than half because the device also requires power to function.
Date published: 2017-10-05
Bazaarvoice SAP Hybris Integration Version 2.8.1