How to Select a RapidRun System – 3 Simple Steps | C2G

Added to Your
Shopping Cart

text.skipToContent text.skipToNavigation

Building a RapidRun solution is easy!

A step by step look at creating a RapidRun solution. If you need any help, feel free to contact us or use ConnectXpress to build your solution!

Try ConnectXPress

Image of RapidRun multi-format runner cable

Step 1

Select a runner cable: Determine the runner length and jacket type required for the installation.

RapidRun Multi-Format runner cables are available in lengths from 6 feet to 125 feet with an in–wall, CMG–rated jacket for installations in-wall, and in lengths from 15 feet to 125 feet with a plenum, CMP–rated jacket for installations in shared air spaces.

Image of RapidRun flying lead

Step 2

Select flying leads or wall plates: Each RapidRun system requires a flying lead or wall plate on both ends of the runner cable.

RapidRun Multi-Format requires two flying leads and two wall plates, or one flying lead and one wall plate. The same AV connector must be used on both sides of the runner cable. For example, if a VGA wall plate is used at the source end of the cable, then a VGA flying lead or VGA wall plate must be used at the display end of the runner cable.

Image of RapidRun face plate

Step 3

Select accessories: Many RapidRun applications require additional accessories for installation or for finish work.

If any decorative style wall plates have been selected, then a decorative compatible wall plate cover must be used to complete the finished look of the installation.">decorative style wall plates have been selected, then a decorative compatible wall plate cover must be used to complete the finished look of the installation.